rej05b0595_m16cap| Application Note
APPLICATION NOTE
M32C/84 Group
Wait Mode Set-Up
1. Abstract
Settings and operation for entering wait mode are described here. Figure 1 shows the set-up procedure. In the reference program,wait mode is entered when using the CPU clock with 32MHz(PLL clock multiply-by-8, divided-by-2) while the CM02 bit in the CM0 register is set to "0"(peripheral function clock dose not stop in wait mode) and exited when using the INT0 interrupt for a return factor from wait mode.
2.
Introduction
This application note is applied to the M32C/84 group Microcomputers.
This program can be operated under the condition of M16C family products with the same SFR(Special Function Register) as M32C/84 Group products. Because some functions may be modified of the M16C family products, see the user's manual. When using the functions shown in this application note, evaluate them carefully for an operation
REJ05B0595-0100/Rev.1.00
April 2005
Page 1 of 10
rej05b0595_m16cap Application Note renesas Download PDF
Add this permalink to your bookmarks for future download of rej05b0595_m16cap ApplicationNote
Permalink: http://application.emcelettronica.com/renesas/rej05b0595_m16cap
